Using the colloidal solution combustion approach, a three-dimensional mesoporous 5%Ni-CeO₂-M catalyst was developed, with Ni incorporated into the pores, and applied in the dry reforming of methane. Comprehensive characterization revealed that the 5%Ni-CeO₂-M catalyst had a large specific surface area and a three-dimensional mesoporous structure. A rich Ni-CeO₂ interface was formed by closely spaced tiny CeO₂ and NiO nanoparticles within the spherical pore wall. With very little carbon deposition over a 100 h period at 700 °C, the catalyst showed excellent activity and stability. The tiny Ni nanoparticles, along with the substantial Ni-CeO₂ interfaces that make up this three-dimensional in-form mesoporous catalyst, are responsible for the outstanding effectiveness of this 5%Ni-CeO₂-M catalyst. Full article

Background: This retrospective cross-sectional study investigated the cutoff values (COVs) for developmental dysplasia of the hip (DDH) using a three-dimensional (3D) pelvic model reconstructed using computed tomography (CT). We included 107 healthy Japanese participants and 73 patients who had undergone curved periacetabular osteotomy (CPO) for DDH between 2012 and 2017. Methods: The hip CT images were adjusted to the anterior pelvic plane (APP), functional pelvic plane (FPP), sagittal anterior center-edge angle (ACEA), and sagittal posterior center-edge angle (PCEA). The lateral center-edge angle (LCEA), acetabular roof obliquity (ARO), anterior acetabular sector angle (AASA), and posterior acetabular sector angle (PASA) were measured. Receiver operating characteristic (ROC) curves were used to calculate the COVs, and the association between the parameters was analyzed using multiple logistic regression. Results: The ARO (≥10.2°) and LCEA (≤22.2°) were independent influencing factors for the APP, whereas the AASA (≤53.1°) and LCEA (≤24.5°) were independent influencing factors for the FPP. Conclusions: The 3D criteria for the diagnosis of DDH in Japanese individuals can identify DDH with insufficient anterior coverage, which anteroposterior plain radiographs cannot visualize, and can help determine indications for acetabular osteotomy. Full article

The timely and accurate identification of causative agents is crucial for effectively managing fracture-related infections (FRIs). Among various diagnostic methods, the “time to positivity” (TTP) of cultures has emerged as a valuable predictive factor in infectious diseases. While sonication of implants and inoculation of blood culture bottles with sonication fluid have enhanced sensitivity, data on the TTP of this microbiological technique remain limited. Therefore, patients with ICM criteria for confirmed FRI treated at our institution between March 2019 and March 2023 were retrospectively identified and their microbiological records were analyzed. The primary outcome parameter was TTP for different microorganism species cultured in a liquid culture collected from patients with confirmed FRI. A total of 155 sonication fluid samples from 126 patients (average age 57.0 ± 17.4 years, 68.3% males) was analyzed. Positive bacterial detection was observed in 78.7% (122/155) of the liquid culture pairs infused with sonication fluid. Staphylococcus aureus was the most prevalent organism (42.6%). Streptococcus species exhibited the fastest TTP (median 11.9 h), followed by Staphylococcus aureus (median 12.1 h) and Gram-negative bacteria (median 12.5 h), all of which had a 100% detection rate within 48 h after inoculation. Since all Gram-negative pathogens yielded positive culture results within 24 h, it could be discussed if empirical antibiotic therapy could be de-escalated early and limited towards the Gram-positive germ spectrum if no Gram-negative pathogens are detected up to this time point in the context of antibiotic stewardship. Full article

Fresh food is difficult to preserve, especially because its characteristics can change, and its nutritional value may decrease. Therefore, from the consumer’s point of view, it would be very useful if, when buying fresh fruit or vegetables, they could know where it has been cultivated, when it was harvested and everything that has happened from its harvest until it reached the supermarket shelf. In other words, the consumer would like to have information about the traceability of the fruit or vegetables they intend to buy. This article presents a blockchain-based platform that allows institutions, consumers and business partners to track, back and forward, quality and sustainability information about all types of fresh fruits and vegetables. Full article

Pulmonary arterial hypertension (PAH) remains a significant challenge in cardiology, necessitating advancements in treatment strategies. This study explores the safety and efficacy of transitioning patients from beraprost to selexipag, a novel selective prostacyclin receptor agonist, within a Japanese cohort. Employing a multicenter, open-label, prospective design, 25 PAH patients inadequately managed on beraprost were switched to selexipag. Key inclusion criteria included ongoing beraprost therapy for ≥3 months, a diagnosis of PAH confirmed by mean pulmonary artery pressure (mPAP) ≥ 25 mmHg, and current treatment with endothelin receptor antagonists and/or phosphodiesterase type 5 inhibitors. Outcomes assessed were changes in hemodynamic parameters (mPAP, cardiac index, pulmonary vascular resistance) and the 6 min walk distance (6-MWD) over 3–6 months. The study found no statistically significant changes in these parameters post-switch. However, a subset of patients, defined as responders, demonstrated improvements in all measured hemodynamic parameters, suggesting a potential benefit in carefully selected patients. The transition was generally well-tolerated with no serious adverse events reported. This investigation underscores the importance of personalized treatment strategies in PAH, highlighting that certain patients may benefit from switching to selexipag, particularly those previously on higher doses of beraprost. Further research is needed to elucidate the predictors of positive response to selexipag and optimize treatment regimens for this complex condition. Full article

New insights into intractable industrial challenges can be revealed by framing them in terms of natural science. One intractable industrial challenge is that creative production can be much more financially expensive and time consuming than standardized production. Creative products include a wide range of goods that have one or more original characteristics. The scaling up of creative production is hindered by high financial production costs and long production durations. In this paper, creative production is framed in terms of interactions between entropy and complexity during progressions from emergent pragmatics to action semantics. An analysis of interactions between entropy and complexity is provided that relates established practice in creative production to organizational survival in changing environments. The analysis in this paper is related to assembly theory, which is a recent theoretical development in natural science that addresses how open-ended generation of complex physical objects can emerge from selection in biology. Parallels between assembly practice in industrial production and assembly theory in natural science are explained through constructs that are common to both, such as assembly index. Overall, analyses reported in the paper reveal that interactions between entropy and complexity underlie intractable challenges in creative production, from the production of individual products to the survival of companies. Full article

Background: This study aimed to compare keratometry and anterior chamber depth (ACD) changes after XEN implantation in primary open-angle glaucoma (POAG) cases over a 3-month follow-up period. Methods: Twenty patients with POAG who underwent XEN63 implantation, either standalone or combined with cataract surgery, were included. Preoperative data, including best-corrected visual acuity (BCVA), refraction, gonioscopy, ophthalmoscopy, intraocular pressure (IOP) evaluation, and axial length, were collected. Corneal topography and ACD measurements were assessed preoperatively and at postoperative days 1, 7, 15, 30, 60, and 90. Each patient’s eye that underwent XEN surgery was included in the study group, with the fellow eye serving as a control. Results: In the study group, there was a significant decrease in IOP after XEN stent implantation at all investigated time intervals (p < 0.05). However, changes in mean ACD did not show statistically significant differences at any follow-up examination in both the study and control groups. Additionally, keratometry readings revealed no significant changes in total astigmatism or steep keratometry values in either group. Conclusions: XEN implantation in POAG cases resulted in a significant decrease in IOP over the 3-month follow-up period. However, there were no significant changes observed in mean ACD or keratometry readings, indicating stability in these parameters post-XEN implantation. These findings suggest that XEN implantation may be an effective option for IOP reduction without affecting corneal curvature or ACD in POAG patients. Full article

Selective laser melting (SLM) forms specimens that often exhibit anisotropic mechanical properties. Most existing research only explains that the mechanical properties of specimens perpendicular to the build direction are superior to those parallel to the build direction. In this paper, the mechanical properties of SLM 316L SS specimens with different surfaces and different directions are compared. Finally, it was found that the mechanical properties of specimens on Face 3 are stronger than those on Face 1 and Face 2, while the mechanical properties of specimens on Face 1 and Face 2 are similar. For specimens in different directions on the same surface, the mechanical properties of Face 1 and Face 2 exhibit clear anisotropy, while the mechanical properties of Face 3 tend to be isotropic. In this paper, the EBSD technique was used to analyze the specimens. It was found that the anisotropy of the mechanical properties of Face 1 and Face 2 are attributed to the presence of texture and columnar crystals in the sample. This paper can provide accurate and reliable material performance data for the practical application of SLM 316L SS, thereby guiding the optimization of engineering design and manufacturing processes. Full article

(1) Background: Subclinical hypothyroidism (SHT) is a condition that has been a subject of controversy in the literature due to its association with psychological and psychiatric symptoms as well as autonomic imbalances. To gain a better understanding of the effects of SHT on patients, a research study has been undertaken to investigate the presence of psychological symptoms and autonomic imbalances in a group of individuals diagnosed with SHT. (2) Methods: In this case–control study, 50 patients diagnosed with SHT who accessed the Department of Endocrinology of the University of Pisa were consecutively recruited. Psychological symptoms were measured through the Crown–Crisp Experiential Index (CCEI), whereas autonomic imbalance was described using the Psychophysiological Stress Profile (PSP), with simultaneous recording of the following psychophysiological parameters: Surface Electromyogram (sEMG), Skin Conductance Level (SCL), heart rate (HR), and peripheral temperature (PT). The patients’ values were compared to those of 50 healthy control subjects. (3) Results: The comparison between groups highlighted significant differences in the CCEI and PSP. In particular, patients reported higher rates of psychological symptoms (anxiety, depression, somatic complaints, and hysteria behavior). Significantly higher levels of autonomic arousal were also recorded. More specifically, the sEMG, SCL, HR, and PT values were different between the two groups. (4) Conclusions: The study has confirmed the presence of autonomic hyperarousal in patients diagnosed with subclinical hypothyroidism. This is likely due to the body’s attempt to compensate for a general lack of energy by accelerating the autonomic activity. The findings also underline the significance of a comprehensive assessment approach that takes into account various dimensions such as psychological and psychophysical well-being. Such an approach helps in evaluating the impact of subclinical diseases on overall health and well-being. Full article

This study investigates the relationship between dietary habits and metabolic health among women, emphasizing the role of anthropometric parameters as proxies for insulin resistance. We analyzed data from 443 women categorized into two groups based on the presence or absence of clinically diagnosed insulin resistance. Our assessments included dietary quality, socio-demographic characteristics, and a series of anthropometric measurements such as body weight, Body Mass Index (BMI), Waist-Hip Ratio (WHR), Abdominal Volume Index (AVI), and Body Adiposity Index (BAI). The results indicated significant disparities in these parameters, with the insulin-resistant group exhibiting higher average body weight (78.92 kg vs. 65.04 kg, p < 0.001), BMI (28.45 kg/m² vs. 23.17 kg/m², p < 0.001), and other related measures, suggesting a strong influence of dietary patterns on body composition and metabolic risk. The study underscores the importance of dietary management in addressing insulin resistance, advocating for personalized dietary strategies to improve metabolic health outcomes in women. This approach highlights the need for integrating dietary changes with lifestyle modifications and socio-demographic considerations to combat metabolic risks effectively. Full article

Nowadays, trajectory control is a significant issue for unmanned micro aerial vehicles (MAVs) due to large disturbances such as wind and storms. Trajectory control is typically implemented using a proportional–integral–derivative (PID) controller. In order to achieve high accuracy in trajectory tracking, it is essential to set the PID gain parameters to optimum values. For this reason, separate gain values are set for roll, pitch and yaw movements before autonomous flight in quadrotor systems. Traditionally, this adjustment is performed manually or automatically in autotune mode. Given the constraints of narrow orchard corridors, the use of manual or autotune mode is neither practical nor effective, as the quadrotor system has to fly in narrow apple orchard corridors covered with hail nets. These reasons require the development of an innovative solution specific to quadrotor vehicles designed for constrained areas such as apple orchards. This paper recognizes the need for effective trajectory control in quadrotors and proposes a novel neural network-based approach to tuning the optimal PID control parameters. This new approach not only improves trajectory control efficiency but also addresses the unique challenges posed by environments with constrained locational characteristics. Flight simulations using the proposed neural network models have demonstrated successful trajectory tracking performance and highlighted the superiority of the feed-forward back propagation network (FFBPN), especially in latitude tracking within 7.52745 × 10⁻⁵ RMSE trajectory error. Simulation results support the high performance of the proposed approach for the development of automatic flight capabilities in challenging environments. Full article

Bacteroides vulgatus and Bacteroides uniformis are known to be abundant in the human fecal microbial community. Although these strains typically remain stable over time in humans, disruption of this microbial community following antibiotics resulted in the transient change to new strains suggesting that a complex, dynamic strain community exists in humans. To further study the selection of dominant fecal microbial strains from the gastrointestinal tract (GIT) community, we analyzed three longitudinal metagenomic sequencing data sets using BLAST+ to identify genes encoding Bacteroidales-specific antimicrobial proteins (BSAP) that have known functions to restrict species-specific replication of B. uniformis (BSAP-2) or B. vulgatus (BSAP-3) and have been postulated to provide a competitive advantage in microbial communities. In the HMP (Human Microbiome Project) data set, we found fecal samples from individuals had B. vulgatus or B. uniformis with either complete or deleted BSAP genes that did not change over time. We also examined fecal samples from two separate longitudinal data sets of individuals who had been given either single or multiple antibiotics. The BSAP gene pattern from most individuals given either single or multiple antibiotics recovered to be the same as the pre-antibiotic strain. However, in a few individuals, we found incomplete BSAP-3 genes at early times during the recovery that were replaced by B. vulgatus with the complete BSAP-3 gene, consistent with the function of the BSAP to specifically restrict Bacteroides spp. The results of these studies provide insights into the fluxes that occur in the Bacteroides spp. GIT community following perturbation and the dynamics of the selection of a dominant fecal strain of Bacteroides spp. Full article

Cyanobacterial harmful algal blooms (cyanoHABs) occur in fresh water globally. These can degrade water quality and produce toxins, resulting in ecological and economic damages. Thus, short-term management methods (i.e., algaecides) are necessary to rapidly mitigate the negative impacts of cyanoHABs. In this study, we assess the efficacy of a hydrogen peroxide-based algaecide (PAK^® 27) on a Microcystis dominated bloom which occurred within the Pahokee Marina on Lake Okeechobee, Florida, USA. We observed a significant reduction in chlorophyll a (96.81%), phycocyanin (93.17%), and Microcystis cell counts (99.92%), and a substantial reduction in microcystins (86.7%) 48 h after treatment (HAT). Additionally, there was a significant shift in bacterial community structure 48 HAT, which coincided with an increase in the relative abundance of photosynthetic protists. These results indicate that hydrogen peroxide-based algaecides are an effective treatment method for cyanoHAB control and highlight their effects on non-target microorganisms (i.e., bacteria and protists). Full article

As a renewable and sustainable resource, lignocellulosic biomass serves as a crucial raw material for the production of biofuels, biochemicals, and various value-added products. This paper aims to develop and optimize a mild alkaline treatment of sawdust assisted by ultrasound, along with enzymatic hydrolysis of the pretreated material. The alkaline sonochemical pretreatment emerged as the optimal approach to enhance the susceptibility of cellulose to subsequent enzymatic hydrolysis to improve the yield of reducing sugars. A comparative study was performed using various ultrasonic applicators (horn and bath) and conventional assisted alkaline pretreatment. The ultrasonic-assisted pretreatment revealed a higher delignification of 68% (horn) and 57% (bath) compared with conventional pretreatment. Processes were optimized using a statistical analysis based on a 2³ factorial design. The ratios between sawdust and alkaline solution (R_SL = 0.5–1.5 g/100 mL), US amplitude (A = 20–60%), and working temperature (t = 30–50 °C) were selected as process factors. The optimal operating conditions to maximize the reducing sugar yield (138.15 mg GE/g_substrate) were found as follows: a solid/liquid ratio of R_SL,opt = 1.25 g/100 mL, US amplitude of A_opt = 60%, and pretreatment temperature of t_opt = 50 °C. The overall outcomes clearly confirmed the intensification of delignification by ultrasound-assisted alkaline pretreatment. Full article

The “Esquela Tusuy” dance is a cultural manifestation deeply rooted in the Uchumiri Peasant Community (Condesuyos, Peru), reflecting the intersection between traditional cultural practices and community identity. This ethnographic study reveals how the dance, beyond being a mere artistic expression, is a complex system of meanings that articulates social relations, economic practices of barter, and Andean spirituality, through the veneration of Pachamama and Apu Coropuna. The dance is organized around rituals that include the preparation, journey, and return of the llama herders, being a living expression of collective memory and a mechanism of social cohesion. The adopted methodology was based on participant observation and semi-structured interviews, allowing a detailed understanding of Uchumiri’s cultural dynamics. Despite contemporary challenges, “Esquela Tusuy” remains a central pillar for the affirmation of cultural identity and community resistance, underlining the importance of dance in the conservation of cultural heritage and in the articulation of local identities against national narratives. Full article

Solar wind is known to have different properties depending on its origin at the Sun. In addition to the differences in plasma and magnetic field parameters, these streams differ due to the properties of turbulent fluctuations involved in the flow. The present study addresses the changes in the turbulence properties in the magnetosheath—the transition region in front of the magnetosphere. This study is based on statistics from the simultaneous measurements of magnetic field fluctuations in the solar wind and in the magnetosheath. Both the dayside and flank magnetosheath regions are focused on to detect the evolution of the turbulent fluctuations during their flow around the magnetosphere. Turbulent cascade is shown to save its properties for fast solar wind streams. Conditions favorable for the preservation of the turbulence properties at the bow shock may correspond to the increased geoefficiency of large-scale solar wind structures. Full article

Demodex mites are acari, common ectoparasites of humans and other mammalian pilosebaceous units. Demodicosis occurs when mites overpopulate the skin, causing several skin disorders. Our aim was to investigate the prevalence of demodicosis in patients with suspicious clinical features, such as cheek redness, itching, and skin sensitivity, who presented at the outpatient clinic of the Andreas Syggros Dermatology Hospital in Greece. We studied 184 individuals aged between 18 and 97 years and analyzed the content of pilosebaceous units by microscopy to determine the density of Demodex mites. Samples were evaluated as positive when Demodex spp. densities equaled or exceeded 5 mites per square cm. Sixty-six percent of the examined subjects were positive for demodicosis. The age distribution was statistically normal (p = 0.2), and the median age was 51.29 years. Seventy percent of the patients were females, and 30% were males, while 64.46% of the demodicosis-positive individuals were females, and 35.54% were males. We observed a rise in the percentage of males as the age of the patients increased. Demodicosis can be a challenging disease because it presents apart from the typical symptoms, with a variety of nonspecific symptoms mimicking other dermatological skin conditions. Therefore, it is important to investigate Demodex spp. in patients who present with common facial dermatological diseases to improve treatment results. Further studies could contribute to a better understanding of the pathogenic role of Demodex mites and how this role is affected by mite density, host sex and age. Full article

Systemic hypertension has been considered mainly as an adult health issue for a long time, but it is now being increasingly acknowledged as a significant problem also among pediatric patients. The frequency of pediatric hypertension has grown mostly because of increases in childhood obesity and sedentary lifestyles, but secondary forms of hypertension play a role as well. Considering that unaddressed hypertension during childhood can result in enduring cardiovascular complications, timely identification and intervention are essential. Strategies for addressing this disease encompass not only lifestyle adjustments, but also the use of medications when needed. Lifestyle modifications entail encouraging a nutritious diet, consistent physical activity, and the maintenance of a healthy weight. Moreover, educating both children and their caregivers about monitoring blood pressure at home can aid in long-term management. Thus, the aim of this review is to discuss the etiologies, classification, and principles of the treatment of hypertension in pediatric patients. Full article

The limits of chip technology are constantly being pushed with the continuous development of integrated circuit manufacturing processes and equipment. Currently, chips contain several billion, and even tens of billions, of transistors, making chip testing increasingly challenging. The verification of very large-scale integrated circuits (VLSI) requires testing on specialized automatic test equipment (ATE), but their cost and size significantly limit their applicability. The current FPGA-based ATE is limited in its scalability and support for few test channels and short test vector lengths. As a result, it is only suitable for testing specific chips in small-scale circuits and cannot be used to test VLSI. This paper proposes a low-cost hardware and software solution for testing digital integrated circuits based on design for testability (DFT) on chips, which enables the functional and performance test of the chip. The solution proposed can effectively use the resources within the FPGA to provide additional test channels. Furthermore, the round-robin data transmission mode can also support test vectors of any length and it can satisfy different types of chip test projects through the dynamic configuration of each test channel. The experiment successfully tested a digital signal processor (DSP) chip with 72 scan test pins (theoretically supporting 160 test pins). Compared to our previous work, the work in this paper increases the number of test channels by four times while reducing resource utilization per channel by 37.5%, demonstrating good scalability and versatility. Full article

The relationship between anxiety symptoms and perceived quality of life among caregivers of children with autism was verified. To assess perceived quality of life, the Short Form Healthy Survey Item was used; perception of anxiety symptoms was assessed using the Beck Anxiety Inventory. Eighty caregivers of children with autism participated, with 68.7% of caregivers being mothers. Of the total number of caregivers, 68.8% had a severe level of anxiety. Regarding perceived quality of life, they demonstrated greater impairment in limitation due to physical aspects, limitation due to emotional aspects, vitality, and pain. Caregivers with severe anxiety levels had a worse quality of life in the domains of pain (p = 0.012), social aspects (p < 0.001), limitation due to emotional aspects (p = 0.001), and mental health (p < 0.001). However, in the functional capacity domain, caregivers with a moderate level of anxiety had a better physical capacity score (p = 0.001). There was a negative correlation between the general anxiety score and the general physical (p = 0.029) and general emotional components of perceived quality of life (p < 0.001). It was found that caregivers of children with ASD have a high level of anxiety, which is a predictor of the perception of a worse quality of life. Full article

The BC501A sensor is a liquid scintillator frequently used in nuclear physics for detecting fast neutrons. This paper describes a hardware implementation of digital pulse shape analysis (DPSA) for real-time analysis. DPSA is an algorithm that extracts the physically relevant parameters from the detected BC501A signals. The hardware solution is implemented in a MicroTCA system that provides the physical, mechanical, electrical, and cooling support for an AMC board (NAMC-ZYNQ-FMC) with a Xilinx ZYNQ Ultrascale-MP SoC. The Xilinx FPGA programmable logic implements a JESD204B interface to high-speed ADCs. The physical and datalink JESD204B layers are implemented using hardware description language (HDL), while the Xilinx high-level synthesis language (HLS) is used for the transport and application layers. The DPSA algorithm is a JESD204B application layer that includes a FIR filter and a constant fraction discriminator (CFD) function, a baseline calculation function, a peak detection function, and an energy calculation function. This architecture achieves an analysis mean time of less than 100 µs per signal with an FPGA resource utilization of about 50% of its most used resources. This paper presents a high-performance DPSA embedded system that interfaces with a 1 GS/s ADC and performs accurate calculations with relatively low latency. Full article